. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 24-08-2014 #13
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by EddyCurrent View Post
    Mine was doing that while messing about tuning the motors, I had the velocity and accel too high which was making them stall and trip out. The DRO was still going but the motors were not, to reset them involved power off/on cycle. They worked in jog due to lower settings.
    Don't think this will be the same Eddy. Yours was caused by the wrong tuning stalling motors which tripped the stall detect built into drives which then needed power on/off cycle to reset the drives.! . . . . No such nicetys here I feel.

    But it could be tripped motors from being tuned to close to edge and when machine gets hot after 10mins things tighten up and cause binding so worth knocking tuning back to see. .

    Being 2 motors at same time makes think not thou.!!
    Last edited by JAZZCNC; 24-08-2014 at 10:45 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Eagle CAD problem
    By Fivetide in forum CAD & CAM Software
    Replies: 11
    Last Post: 06-05-2013, 11:56 PM
  2. Another screw problem
    By Swarfing in forum Marketplace Discussion
    Replies: 5
    Last Post: 27-03-2013, 09:24 PM
  3. Problem with X
    By gorbo in forum General Discussion
    Replies: 17
    Last Post: 24-02-2011, 05:33 AM
  4. NEW MEMBER: New with a threading problem
    By GeoffS in forum New Member Introductions
    Replies: 4
    Last Post: 02-12-2009, 09:23 PM
  5. Z Problem
    By airwolf in forum Machine Discussion
    Replies: 2
    Last Post: 10-11-2009, 08:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules