Thread: Amadeal25LV CNC Conversion
Hybrid View
-
15-09-2014 #1
Ah cool. My next plan is to design the lay out of the monitor and electrics etc... But first I shall make up all of the electrics and then get a CNC Conversion kit and get the ball screws to suit
-
20-09-2014 #2
Looks good to me, recommend you cut some extra cooling slots in the drive motor cover as the motor is prone to over heating. I also added a gas strut to to the "Z" axis which improved the lifting and lowering of the head.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CONVERSION: Myford VM-B CNC Conversion.
By John S in forum Conversion Build LogsReplies: 15Last Post: 25-03-2014, 10:10 PM -
CONVERSION: Sieg X2 CNC Conversion
By A11an in forum Conversion Build LogsReplies: 17Last Post: 16-01-2013, 06:06 PM -
CONVERSION: X2 conversion on a budget!
By craigrobbo in forum Conversion Build LogsReplies: 1Last Post: 30-10-2012, 05:00 PM -
CONVERSION: Archdale Conversion
By meyerga00 in forum Conversion Build LogsReplies: 0Last Post: 17-06-2012, 09:24 AM -
Mill conversion to cnc
By wolsey in forum General DiscussionReplies: 1Last Post: 15-08-2011, 11:07 PM
Bookmarks