Stepper Motor Driver v2.3 2A $20 !!!

[Conan257]

I'd so buy these as it would allow me to easily use a PC power supply...

The only drawback is that you have to solder your own components on, i'm fairly experienced with soldering but get the shakes so would rather not solder chips on...

Pre-made versions would go down a storm.

[John S]

I agree with pre-made, at least you have some guarantee it will work out the box.

I have never had much success with SMT components, it may be the fact that I have problems getting the MiG down to under 30 amps ?

.

[Smiler]

I agree with pre-made, at least you have some guarantee it will work out the box.

I have never had much success with SMT components, it may be the fact that I have problems getting the MiG down to under 30 amps ?

.

Need to go pulsed TIG from that point John.


Jeff