Post #56

Ignore the double ball screw, i will mount at least once a vibrating hammer so that's why. Same goes with the triple bearing blocks. 2 are enough. The 2 square bars on the Z plate can easily be substituted by structure of 20mm plate, but i don't have the time to fiddle with it so i will use solid alu bars.

Today just soldered many things. Still no time to update the thread, but one of the things i most like about this design are the gantry legs, save some money on plates, cutting and welding. Cheap profile i mean instead of laser cut plates. As i changed some bits of the design, the gantry legs will have a plate below slightly larger or access hole for mounting the bearing blocks. But i wanted it strong left right, that's the change from the initial plan. look below:



Click image for larger version.  Name: hole.jpg  Views: 524  Size: 360.0 KB  ID: 13297