. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 25-08-2014 #6
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Not sure if your aware or not but if you change the MS you will need to re-tune the motors Step per setting.?

    Also don't run higher than 45Khz kernal speed in Mach3 other wise your opening your self up to potential problems. Best to keep at 25Khz or if must then 35Khz but don't change unless you really can't get the speeds you would like.
    Last edited by JAZZCNC; 25-08-2014 at 09:36 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What is your opinion of the CNC 6040 Router Machine ?
    By John S in forum Chinese Machines
    Replies: 7
    Last Post: 30-11-2023, 10:58 AM
  2. New 6040 owner looking for advice from others with a chinese 6040/3040
    By itsmillertime in forum Machine Discussion
    Replies: 12
    Last Post: 14-10-2019, 08:30 AM
  3. Durability of a 6040 ?
    By jimbo_cnc in forum Machine Discussion
    Replies: 10
    Last Post: 11-08-2014, 01:37 AM
  4. Chinese 6040 CNC Router Advise Needed
    By Bob Hepple in forum Chinese Machines
    Replies: 24
    Last Post: 27-11-2013, 12:00 PM
  5. 6040 router
    By John S in forum Milling Machines, Builds & Conversions
    Replies: 13
    Last Post: 01-10-2012, 07:18 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules