laser scanner cnc router mounted

[dazza]

very keen to hear any more about this, i looked into it a while back for scanning surfboards but since have devoted my time to building my router would love to hear if you find a cheaper option.

theres a link to the actual scanner below there about as cheap as it gets price wise far as a i can see.
ive not found any buyer/user feedback on them though.
http://www.prototools.co.uk/shop/cus...id=18575&cat=0

[EddyCurrent]

Any use ?
http://www.david-3d.com/

not laser scanning but interesting all the same

http://reconstructme.net/
http://alternativeto.net/software/reconstructme/
http://usa.autodesk.com/autodesk-123d/

[dazza]

[QUOTE=EddyCurrent;61219]Any use ?
QUOTE]
no but thanks eddy like I said not interested in david and the likes.i did own the david usb version,and played around with the Kinect aswell as 123d.

[EddyCurrent]

Sorry, I missed that line in your first post

[dazza]

Sorry, I missed that line in your first post

no worrys im the biggest culprit for that,i spent a lot of hours on those you mentioned and I couldn't get close to what I needed,.ive not looked in on the david forum for a year or two,maybe things have come along since then.
that I linked to would do me if I could see a bit more of them in action or some feed back.thanks.

[Jester]

I dont know if it helps but ive used two scanners in the past. One a line laser with a webcam which was ok but not brilliant and then secondly an xbox360 kinect with scanekt software. It works great especially with 3d sculptures like heads etc.
http://skanect.occipital.com/

[dazza]

I dont know if it helps but ive used two scanners in the past. One a line laser with a webcam which was ok but not brilliant and then secondly an xbox360 kinect with scanekt software. It works great especially with 3d sculptures like heads etc.
http://skanect.occipital.com/

thanks jester like I said in the above posts ive done all that in the past.projectors, lasers,printing off calibration boards.kinect.. there not for me.
im after a commercial option that fits to the router exactly like that in the link and in that price range.
it looks like I will be going for that in the near future, ive found a company not too far from me sells the same scanner but the price isn't any better.
edited to say i just clicked on your link,that looks great,i couldn't get anything like that with mine but that was a couple of years back.
it looks like the softwares moved on a bit,thanks