laser scanner cnc router mounted

[dazza]

I dont know if it helps but ive used two scanners in the past. One a line laser with a webcam which was ok but not brilliant and then secondly an xbox360 kinect with scanekt software. It works great especially with 3d sculptures like heads etc.
http://skanect.occipital.com/

thanks jester like I said in the above posts ive done all that in the past.projectors, lasers,printing off calibration boards.kinect.. there not for me.
im after a commercial option that fits to the router exactly like that in the link and in that price range.
it looks like I will be going for that in the near future, ive found a company not too far from me sells the same scanner but the price isn't any better.
edited to say i just clicked on your link,that looks great,i couldn't get anything like that with mine but that was a couple of years back.
it looks like the softwares moved on a bit,thanks

[charlieuk]

the david thing has changed a lot all so now but still i would prefer something direct on the cnc as for big object you are going to need a large clear empty space to set it all up in im assuming. I will have to see if there is any info in the surf world on what they are using. i saved this link a while back that some one gave me but i never looked into it

http://www.ifm.com/products/us/ds/O1D100.htm