. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 29-08-2014 #12
    Nthkentman's Avatar
    Lives in Dartford, Kent, United Kingdom.
    Nthkentman
    Last Activity: 30-10-2017 Has been a member for 9-10 years. Has a total post count of 56. Received thanks 1 times, giving thanks to others 17 times.
    Ok, Material setup screen on RHS reads as follows....
    Material Z Zero, red spot top left corner. Thickness 13mm.
    XY Datum centre spot selected. No Use offset" ticked.
    Rapid gaps above material
    Z1 45mm (Need to clear a clamp) Clearance
    Z2 4.8mm (Plunge)

    The preview shows the cut ass I would expect.... about 4mm into the work surface

    I'm thnking I've set something wrong here...
    Will post the actual file from the machine tomorrow into this thread somewhere... I'll open it in Notepad and see if I can see what's gorn awry too
    Last edited by Nthkentman; 29-08-2014 at 07:44 PM.
    If you can't fix it with a hammer you've got an electrical problem !
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Opensource machine for dedicated soft tooling?
    By gavztheouch in forum Moulding Machines
    Replies: 3
    Last Post: 10-02-2014, 10:27 PM
  2. Initial thoughts on new build
    By Neale in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 25-01-2014, 11:05 PM
  3. Some initial questions....
    By andy586 in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 27-01-2013, 03:00 PM
  4. New CNC Controller for Milling Machine
    By antsals in forum Electronic Project Building
    Replies: 26
    Last Post: 08-04-2012, 06:09 PM
  5. Best Type of Machine to Build?
    By Kevin in forum Gantry/Router Machines & Building
    Replies: 6
    Last Post: 05-08-2009, 02:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules