Thread: Selling due to moving to Oz
-
13-09-2014 #1
Its with much regret I'm going to have to sell my upright machine. I would take it with me if i could.
It's currently an unfinished project and has taken a couple of years to get to this point but now there's a chance I might be moving down under. The rust on the frame is just on the surface as its not yet been painted but I may get round to that. Mechanically its solid but will need improvements on the bed. Electrically its uses a 24v safety circuit to control the 70v PSU. The axis limit switches are to be linked to the 24v system to shut it down in the worse came to the worse. Home switches on all axis would need to go to the breakout board to square off the machine.
Build log is here...
http://www.mycncuk.com/threads/5127-...little-project!
100x100x4 box section uprights
60x60x5 frame
60x60x5 Bed has in incline of 85 degrees to aid chip clearance
X-axis
25mm supported round rail all round
2510 ballscrews with rotating ball nuts driven by 4nm steppers
25mm Ali bearing supports
60x60x5 box sections with 20mm ali tooling plate joining the 2 X axis
Y-axis
25mm supported round rail all round
1610 ballscrew belt driven by 4nm steppers
Running on X axis plate and box section
Z-axis
20mm ali tooling plate
25mm supported round rail all round
1605 ballscrew belt driven by 4nm steppers
3kw Watercooled spindle
PSU
70v unregulated
24v regulated
5v regulated
5 x MA860H stepper drivers
Working area of approx 1000x1000x300mm
I'm looking for sensible offers in the region on £2500 as it currently stands
Thanks
RobLast edited by r0bsk1; 13-09-2014 at 10:28 AM.
-
17-09-2014 #2
May break if there's enough interest in parts
-
20-09-2014 #3
-
20-09-2014 #4
scroll over the flag next to his name.edited that's no help.
Last edited by dazza; 20-09-2014 at 01:57 PM.
-
20-09-2014 #5
Thanks. That says 'Ponte Carlo, UK' but Google Maps puts that in the Czech Republic.
-
23-09-2014 #6
Im in Pontefract, West Yorkshire.
If you read through the thread you'd see they weren't random closeups. I try and get a pic of the whole thing tonight.
-
23-09-2014 #7
Afraid this is the best i can get for tonight as its tucked away in a corner
Left side....
Right side
-
23-09-2014 #8
Looks like it dropped the pics. Take 2..
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help! Moving a big lathe...
By Jonathan in forum General DiscussionReplies: 21Last Post: 27-12-2015, 11:54 PM -
FOR SALE: Selling z axis complete set up
By DrNik in forum Items For SaleReplies: 10Last Post: 20-08-2013, 12:38 PM -
FOR SALE: Selling all my 2mt x 1.2mt CNC router bits...
By fasteddy in forum Items For SaleReplies: 15Last Post: 11-04-2013, 06:32 PM -
moving mach3 help please
By h4ppy-chris in forum Artsoft Mach (3 & 4)Replies: 12Last Post: 07-03-2011, 07:33 PM -
Moving a new mill
By abfa9358 in forum Milling Machines, Builds & ConversionsReplies: 5Last Post: 07-05-2010, 11:27 PM
Bookmarks