Threaded View
-
20-09-2014 #1
Hi Guys I’m in need of a bit of help & advice here I have been building an OX machine I got from Robocutters 4 axis 1200mm x 1200mm mounting a Makita Router – I intend to use the CNC to cut wood & cardboard, I’ve bought a special Donek Tools dragknife tool, from the states but I’m also interested in doing carving.
After a bit of a long protracted build with the ‘kit’ I got the mechanics tested had a smoking board ! that has burnt out the A axis diodes & capacitors. After some trawling of forums I’ve decided the controller was cheap rubbish and have endevoured to invest in some better controllers, drivers & if necessary motors. I have a number of Q’s
Mechanics – is the machine robust enough for what I want to use it for ? I planning to build a vacuum bed http://donektools.com/cnc-basics-tutorials/ Which I assume will provide a pretty stable work surface when clamped to the OX rails. but any advice on clamping the CNC and work pieces down would be most welcome as I have little experience of this
Electronics & motors – any advice or even just a nudge in the right direction to controller, drivers & motors – From trawling forums again £6-700 pounds would appear to be realistically what one has to spend
Computer hardware – I managed to get the burnt out controller running on A virtual 32bit version of Windows 7 on a macbookpro using a UC100 usb adapter – this is ideal – I’m prepared to invest in this as well ideally a laptop & USB any advice here ? I’m running a licenced v of Mach 3 – I’ve had varying advice on using LPT ports/ usb adapters
Anyone live in & around north oxfordshire I could really do with a buddy for this !
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Limit switch issues?!?
By jonbabbz in forum General ElectronicsReplies: 10Last Post: 06-02-2014, 07:37 PM -
Advice please! JAF Motion Controller issues!
By Mark Chard in forum Machine Control SoftwareReplies: 0Last Post: 31-01-2014, 05:03 PM -
Page layout issues...
By irving2008 in forum General DiscussionReplies: 3Last Post: 09-08-2012, 08:10 PM -
Cable + Connector issues
By tom3d in forum General ElectronicsReplies: 0Last Post: 09-01-2012, 07:56 PM -
Number plate dies and a Sieg KX3 CNC Hobby Mill
By p4tvw in forum Milling Machines, Builds & ConversionsReplies: 5Last Post: 14-04-2010, 04:51 PM
Bookmarks