Considering DIY machine build - reality check

[JAZZCNC]

Hi Jamie,

Yes it's very do able with 2K provided you do your home work and all the work your self plus don't waste money on buying wrong kit. It won't be top end kit wise IE: Motion control cards etc and you'll have very little room for mistakes but 2K will get you a nice working machine.

0.1mm isn't high accurecy so again provided you use a good design and build to decent standard then won't be a problem achieving this. You'll almost certain need to work with steel to meet your budget and provided your comfortable with working it then makes for very strong accurate machine at sensible money. It just takes longer and few more tools/skills required.

See your in Leeds which side.?