a Steel Box Section Build with SBR20 & Ballscrews Plus a few questions

[grain_r]

Hello Clive thank you for that I wasn't sure on that part,

I have a 300mm ballscrew which is the 1605 from when it was going to be a round rail system would it be a 1610 for this too or will I be able to get away with the 1605 for that?

thank you

Rob

[JAZZCNC]

Hello Clive thank you for that I wasn't sure on that part,

I have a 300mm ballscrew which is the 1605 from when it was going to be a round rail system would it be a 1610 for this too or will I be able to get away with the 1605 for that?

thank you

Rob

1605 will be fine for Z-axis, if connecting to motor with timing belt use a 1:1ratio.