Router/Plasma CNC Build From Down Under

[EddyCurrent]

Thanks Eddy. It looks like a simple solution, but I would not want the machine sitting in wheels all the time for rigidity. I need a simple mechanism to raise and lower the legs or remove them. How do you remove the two rear wheels?

The wheels are solid nylon, they sit on a solid shaft across the back of the machine, there is no movement of any kind when it's sitting down. There are several feet at the front and side and the wheels are positioned such that the machine is level when it is sitting down on the feet, in this position the solid wheels also act as feet because they do not swivel or move sideways, it's rock solid.