Hybrid View
-
03-10-2014 #1
I did a new 445nm 2W Laser Diode engraver build using a Shapeoko 2 with an Arduino UNO and GRBL Shield to control it. Here is a 8bit, analog modulated Laser Diode engraving I did on Birch Ply with this machine. The engraving is 9" X 7.5".
Last edited by JJWMACHINECO; 03-10-2014 at 07:49 PM.
Extensivly Re-worked/Re-designed/Modified Servo K2CNC KG-3925,
Mini Laser Diode Engraver and PicEngrave Pro 4 + Laser
Shapeoko 2 Laser Diode Engraver-Analog/TTL
PicLaser Lite; Image to Gcode for 9g grbl/Mach3 controllers-Laser/Spindle
PicEdit Lite: Image editing for use with PicLaser Lite
PicSender: Streams 9g grbl Raster/Vector Engraving gcodes
https://picengrave.com
-
03-10-2014 #2
Impressive -thanks for showing. G.
-
The Following User Says Thank You to GEOFFREY For This Useful Post:
-
18-10-2014 #3
Thank you GEOFFERY.
Here is information on our Shapeoko 2 laser engraver build.
http://www.instructables.com/id/Shap...t-Raster-Phot/
JeffExtensivly Re-worked/Re-designed/Modified Servo K2CNC KG-3925,
Mini Laser Diode Engraver and PicEngrave Pro 4 + Laser
Shapeoko 2 Laser Diode Engraver-Analog/TTL
PicLaser Lite; Image to Gcode for 9g grbl/Mach3 controllers-Laser/Spindle
PicEdit Lite: Image editing for use with PicLaser Lite
PicSender: Streams 9g grbl Raster/Vector Engraving gcodes
https://picengrave.com
-
18-08-2015 #4
We just finished a new build on our Shapeoko 2 using a 6W 450nm laser Laser Diode from DTR. We were able to reduce the 3D engraving time almost in half compared to using a 2.8W 445nm LD on the examples shown here.
http://forum.darklylabs.com/index.php?p=/discussion/362/3d-engraving-using-picengrave-pro-5
We are still refining the settings in PicEngrave Pro 5, but here are the results of a 3D engraving we did. It's 7.875" X 5.25" in size with a.125" total depth of cut. We used the J-Tech PWM grbl with S20-S255 laser power commands, a variable feedrate (Feed Rate Change) and streamed the 507,365 lines of gcode with our PicSender program.
www.picengrave.comExtensivly Re-worked/Re-designed/Modified Servo K2CNC KG-3925,
Mini Laser Diode Engraver and PicEngrave Pro 4 + Laser
Shapeoko 2 Laser Diode Engraver-Analog/TTL
PicLaser Lite; Image to Gcode for 9g grbl/Mach3 controllers-Laser/Spindle
PicEdit Lite: Image editing for use with PicLaser Lite
PicSender: Streams 9g grbl Raster/Vector Engraving gcodes
https://picengrave.com
-
19-05-2019 #5
Looks great! How long did it take to do?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Laaser Diode Engraving with PicEngrave Pro 4
By Picengraver in forum Woodworking Project ShowcaseReplies: 19Last Post: 27-12-2015, 12:31 AM -
Laser diode module machine addon
By luke11cnc in forum Laser Machines & BuildingReplies: 12Last Post: 06-01-2014, 11:24 PM -
eBay: Kress 1050 FME router with collets & 43mm mount with laser diode
By Tom in forum Items On eBay UKReplies: 0Last Post: 12-11-2013, 09:31 PM -
Laser engraving slate
By Philly in forum Laser Machines & BuildingReplies: 3Last Post: 18-11-2012, 08:19 PM -
Laser Diode Constant Current Driver
By Mad Professor in forum General ElectronicsReplies: 8Last Post: 21-07-2010, 06:01 PM
Bookmarks