Parts needed. Power supply and USB board.

[EddyCurrent]

It would help greatly if you could clearly explain what you are trying to do.

[ukracer]

It would help greatly if you could clearly explain what you are trying to do.

Ok I swapped a non working chinese CNC engraver , which included that box I have photographed in my first post. (swapped it for a vinyl cutter)

I just did it because I wanted to learn a bit of G-code and about CNC in general. I learn best by "doing" and "watching" I cant assimilate tasks by reading easy...for me a picture does not paint a thousand words (some do but many dont.) lol

Anyway in the meantime and before I could get round to finding out what parts I need to get the CNC moving I have the need to make a machine that will raise and lower. As I already had the engraver I thought about using it as a one axis CNC to test things....

This will help you understand what I am doing ...but wont help fix the CNC control box pictured in the first post. (What I am making is at 1.00 minute in....)

Thanks to jaz I know a quick way of using a PC with only USB to control, it all when its working...........

Regards Andy t