Quote Originally Posted by mekanik View Post
Hi Guys
The intention of my post was just to highlight the use of concrete as a solid base for construction not to construct the lathe shown. a couple of lengths of 25mm square steel bar and a small quantity of rebar and a simple box mould would give you a solid base on which to mount a couple of Hiwin Rails.
I have seen on superb gantry mill manufactured this way(sorry can't find the link) but this is something similar.
https://www.youtube.com/watch?v=fDiEi2bOXgs
Regards
Mike
Yeah concreet was very popular during ww2 for lathes and mills and some boats, its the diy lathe thing if funny because of the availability of lathes for cheeps that already have nice ways and alignment and all that stuff. E.g. The boxford plain lathe for £350 that would make an awsome base for cnc lathe and tey can be got for even less if you hunt arround a bit.

although making your own tools is an amazing way of learning a lot about the way they get made and what makes them good or bad.

no offence ment prommis,

Stuart