Wiring a motor - as a newbie!

[EddyCurrent]

Parallel connections

A+ Red & Blue joined together
A- Yellow & Black joined together
B+ White & Brown joined together
B- Orange & Green joined together

Edit: Ha ha you just beat me to it but you got B- wrong (typing too fast likely)

[D-man]

Thats it im now a "pro" haha cheers boys appreciate it! time to wire this baby up

[D-man]

Crap ran into another stickler...

Im using the MSD542 drivers with the Nema 23 SY60

Motor diagram looks like this...


However the Driver datasheed does not give colour codes http://www.motioncontrolproducts.com...ing-driver.pdf

I have the wires joined, its just getting the 4 coupled wires into the A+ A- & B+ B- if you know what i mean.. how do you determine what double wire is for where

[EddyCurrent]

A+ yellow/white & red
A- yellow & red/white
B+ green/white & black
B- green & black/white

see diagram on page 7 for parallel 8 wire connection

http://www.leadshine.com/UploadFile/Down/AM882m.pdf

[D-man]

cheers does it matter if its not a Leadshine?

[EddyCurrent]

No, it was just a diagram I knew about, it's the motor drawing that matters.

[D-man]

OK guys another one im needing help with... i have another SY60STH86/3008BF - however the wire colours are different but on zapps website datasheet

The wires on my motor are as follows

red
blue
black
green
blue/white
black/white
red/white
green/white

sure this is just done to confuse the hell out of me haha

[D-man]

OK so maybe not so bad as i thought.. only the Blue & Blue/White is different. will call this the "Yellow" wire :)

So is this correct:

A+ yellow/white & yellow (but its blue!)
A- Red/White & Red
B+ Green/White & Green
B- Black/White & Black

[EddyCurrent]

Using the standard diagram;



For any colour scheme with parallel connections use this; (I've just used -A etc. to represent A with a bar on top (not A))

A+ (A to -C )
A- (-A to C )
B+ (B to -D)
B- (-B to D)