. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Are you sure you want to use that way to connect the motor ? that's a series connection, most would recommend the parallel connection.

    A+ Red
    A- Black
    B+ White
    B- Green

    Yellow & Blue, connected together but going nowhere, just insulate once joined.
    Orange & Brown, connected together but going nowhere, just insulate once joined.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  2. #2
    Well it was just to try get my head around it Eddie, then i looked at the parallel connection and started to smell smoke (From my brain!) Parallel connection here http://prntscr.com/4wyek3

    Cheers for that Eddie appreciate it

  3. #3
    Parallel connections

    A+ Red & Blue joined together
    A- Yellow & Black joined together
    B+ White & Brown joined together
    B- Orange & Green joined together

    Edit: Ha ha you just beat me to it but you got B- wrong (typing too fast likely)
    Last edited by EddyCurrent; 17-10-2014 at 10:11 AM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  4. The Following User Says Thank You to EddyCurrent For This Useful Post:


  5. #4
    Thats it im now a "pro" haha cheers boys appreciate it! time to wire this baby up

  6. #5
    Crap ran into another stickler...

    Im using the MSD542 drivers with the Nema 23 SY60

    Motor diagram looks like this...


    However the Driver datasheed does not give colour codes http://www.motioncontrolproducts.com...ing-driver.pdf

    I have the wires joined, its just getting the 4 coupled wires into the A+ A- & B+ B- if you know what i mean.. how do you determine what double wire is for where
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	SY60.bmp 
Views:	1235 
Size:	1.97 MB 
ID:	13648  

  7. #6
    A+ yellow/white & red
    A- yellow & red/white
    B+ green/white & black
    B- green & black/white

    see diagram on page 7 for parallel 8 wire connection

    http://www.leadshine.com/UploadFile/Down/AM882m.pdf
    Last edited by EddyCurrent; 17-10-2014 at 03:47 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  8. #7
    cheers does it matter if its not a Leadshine?

  9. #8
    OK guys another one im needing help with... i have another SY60STH86/3008BF - however the wire colours are different but on zapps website datasheet

    The wires on my motor are as follows

    red
    blue
    black
    green
    blue/white
    black/white
    red/white
    green/white

    sure this is just done to confuse the hell out of me haha

  10. #9
    Ok so, going for the parallel connection am i right in saying...

    A+ - Red/Blue
    A- - Yellow/Black

    B+ - White/Brown
    B- - Orange/Brown



    My head hurts this early

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stepper motor tunning wiring
    By handyoodman03 in forum Stepper & Servo Motors
    Replies: 47
    Last Post: 11-01-2013, 05:49 PM
  2. Newbie Initial Wiring/Setup
    By Rikk in forum Motor Drivers & Controllers
    Replies: 3
    Last Post: 28-06-2011, 10:19 AM
  3. Stepper motor wiring
    By Buba b in forum Stepper & Servo Motors
    Replies: 5
    Last Post: 28-03-2010, 06:16 PM
  4. Stepper Motor Wiring (Screened?)
    By pequod in forum Stepper & Servo Motors
    Replies: 19
    Last Post: 03-08-2009, 10:15 AM
  5. Motor / drive wiring problem: help!
    By lateAtNight in forum General Electronics
    Replies: 2
    Last Post: 29-04-2009, 07:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •