Wiring a motor - as a newbie!

[EddyCurrent]

Using the diagram above

Parallel

A+ (Yellow/White to Red)
A- (Yellow to Red/White)
B+ (Green/White to Black)
B- (Green to Black/White)

Series

A+ (Yellow/White)
A- (Red/White)
B+ (Green/White)
B- (Black/White)

(Yellow to Red) not connected to any terminal, just connect together and insulate.
(Green to Black)not connected to any terminal, just connect together and insulate.

[charlieuk]

Ok so when in parallel you pair the 8 wires (4pairs)accordingly and then they would go strait to the terminals on the driver were as in series you just have 4 of them paired (2pairs) and the other 4 go to the driver?
Many thanks

[EddyCurrent]

Yes that's right

[charlieuk]

Many thanks indeed not sure why I got so confused I have attached a picture of it hopefully done correctly

[EddyCurrent]

The colours look to be in the right places, just can't make out the labels.
Where you have that earth wire showing it's good practice to cover it with black tape or a piece of black sleeving just so anyone else would know it's being used as a live conductor and not an earth wire.

[charlieuk]

cheers thats great i have done the other end of the earth cable but will put some that end as well thanks for your patience.