Twin ball screw drive on X - configuration question

[HiltonSteve]

Steve, take a look at this: Link


Look for post #9 by HS93, i'v been asking belt related questions as well, you can use that to work out what size belts you need.

I'v not seen anyone use two leadscrews on the X Axis befor, its normally the Y Axis they do it on to stop "racking", do you really need two?
If you could submit some of your design for us to look at it may help with ideas.

Well you have just answered all my questions on sizing belts and pulleys! Nice one Lee.

Just need to figure out what configuration will work best, may build into my design the option to try them all and see how it works.

Just one other thing, you look way to serious in that avatar photo to the point were you are scaring my kids! Ever felt the urge to become an axe murderer???

[Lee Roberts]

Well you have just answered all my questions on sizing belts and pulleys! Nice one Lee.

Your welcome mate, i'v added those posts to the FAQ section for later use if you ever need to go looking for them.

Just need to figure out what configuration will work best, may build into my design the option to try them all and see how it works.

Indeed, ill keep an eye out for your findings.