Thread: VFD upgrade
Threaded View
-
22-10-2014 #6
Just to be clear, vector control gets rated torque down to low (zero with an encoder) speed - it doesn't increase the torque above rated at low speed, as that would exceed the ratings of the motor. This is important since power is the product of torque and speed, so with a constant torque vs speed characteristic the power is proportional to speed - so you only get rated power at rated speed. Or half rated power at half speed... etc
Last edited by Jonathan; 22-10-2014 at 11:05 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CNC 3020 Enclosure/Upgrade
By Pointy in forum Electronic Project BuildingReplies: 59Last Post: 27-10-2014, 10:20 PM -
Kress Spindle upgrade to a 2kw
By Metal pecker in forum Kress Milling MotorsReplies: 4Last Post: 05-05-2014, 12:22 PM -
Improve Kress TIR or get an upgrade?
By Hauk in forum Kress Milling MotorsReplies: 3Last Post: 23-02-2014, 06:18 PM -
Upgrade
By Dopy in forum General DiscussionReplies: 0Last Post: 09-11-2011, 01:57 AM -
BUILD LOG: Time for mk2 upgrade!
By routercnc in forum DIY Router Build LogsReplies: 16Last Post: 26-02-2011, 11:38 PM
Bookmarks