VFD upgrade

[EddyCurrent]

Used like this only the sanding drum is held from above in the spindle collet, Z moves up and down.

http://www.axminster.co.uk/jet-jbos-...FSuWtAodRyMAxg

Regarding settings for ABB, one of the main problems was getting the right technical data about the spindle motor, your spindle is not the same as mine so the settings I have will not be exact and I could not say for sure they would work. see here; http://www.mycncuk.com/threads/6565-...4303#post54303

Schneider Altivar is good stuff, used a lot in industry, you won't go wrong with those, don't know about LG.

[paulus.v]

Now I get the sanding use.

I thought you have the 2.2kw chinese spindle.

I'm waiting for a price for the Altivar inverter. I think Schneider will it be.

Has anyone here experience setting up the Schneider Altivar 12 with the chinese 2.2kw spindle and Mach3?