Lathe Indexing Tools

[T0rnado69]

well after going throu all the holders that come in this set.
1. Turning & facing at 90' with 95' approach RH style
2. Turning & facing at 90' with 95' approach LH style
3. Only turning with 75' approach utilising 100' unused RH cutting corners
4. Only through facing with 75' approach utilising 100' LH unused cutting corners
5. 50' Chamfer on both LH & RH side
6. 45' Chamfer on RH side and 55' on LH side
7. Boring & facing counterbore @ 90 'with 95 'approach for minimum bore size dia of 9.5mm

i would use 1 proberly more then 2, but would still use both.
i dont think i can see me using 3 and 4. and if i did, proberly once in a blue moon ?
5 and 6 i would use but proberly not as much as 1 and 2.
and 7 i would use.

but i was thinking on buying 1 and 2 in a kit.
then maybe 7 on its own but the throu coolant one ?
anyway tried them over the standard boring bars.
as for 5 and 6 i could use the TCT ones i have for now then get them in indexables when i can.
and then look at getting the internal and external threading holders...