Thread: Vcarve workpiece orientation
Hybrid View
-
29-10-2014 #1
Last edited by Earle; 29-10-2014 at 10:52 PM.
-
30-10-2014 #2
I'm unable to do that due to running 2 motors on the x
-
30-10-2014 #3
draw it in X-axis and rotate into Y-axis
-
30-10-2014 #4
yeah thats what im currently doing but thought i would rather try and fix it so i dont have to mess about
-
30-10-2014 #5
It only takes a couple of key strokes!!
-
30-10-2014 #6
yeah, i get that, but surly you can see im a fussy twat haha
-
30-10-2014 #7
-
30-10-2014 #8
Last edited by EddyCurrent; 30-10-2014 at 10:10 AM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
30-10-2014 #9
so its a case of just living with it
-
30-10-2014 #10
If you were doing lots of it the same way then you might want to change but if you are working on different layouts I would say leave as is, quick rotate is select all press Ctrl +9 45 left, Ctrl +0 45 right
-
The Following User Says Thank You to phill05 For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
vcarve pro 7
By GeoDurie in forum CAD & CAM SoftwareReplies: 3Last Post: 22-05-2014, 02:46 PM -
Workpiece illumination
By cropwell in forum Workshop & EquipmentReplies: 0Last Post: 29-09-2013, 10:21 PM -
Securing the workpiece
By jrob3rts in forum Machine DiscussionReplies: 3Last Post: 16-06-2012, 10:21 PM -
Vcarve to Mach3
By jcb121 in forum VectricReplies: 6Last Post: 01-04-2012, 05:21 PM -
Workpiece hold down by glue
By Robin Hewitt in forum Machine DiscussionReplies: 2Last Post: 30-09-2010, 08:22 PM
Bookmarks