Vcarve workpiece orientation

[phill05]

Okay, this is my last post on this. I do not seem to think you can rotate the material. All I'm saying is two things;

1. Only the vectors rotate when you apply transforms, the material does not. "Correct"
2. As I see it the material is part of the workpiece

read what D-man asked for in post 1 "Hey guys, I'm having a bit or a mate at the moment with the workpiece in vcarve pro outputting to the machine.

for example if I want to cut along the Y on the machine I have to create my workpiece vertically in VCP

any ideas