Wiring a Corner finder and height control

[Ger21]

went into the simple zero file does this make sense?

Else ' Off = Metric Measure MM

FirstProbeDist = 150.0 ' Probe down 150mm
FirstRetractDist = 1.0 ' Then retract 1mm
SecProbeDist = 6.0 ' Then probe down 6mm
FirstProbeFeed = 250.0 ' First probe feed @ 250 mm/min
SecondProbeFeed = 25.0 ' Second probe feed @ 25 mm/min
ClearAllow = 2.0 ' Max Allowable Clearance = Z Machine Zero - 2mm



i cant read that lol

Those are hard coded default values, and have nothing to do with the issue.

Really, there should be no way that it can plunge down after probing.

I'd need to know what the message on the screen said after it plunged down.

PS. Your collet nut is too loose.