Threaded View
-
14-11-2014 #13
Yes strange statement but really is true. The difference between good and Bad electronics unfortunatly does kind of translate into Cheap or Expensive.
Again unfortunatly the Cheap route all to often becomes the expensive route and most anyone who as experienced the performance difference Good quality Digital drives make to steppers will tell you they are worth every penny. Equally anyone who as experienced the hair pulling head banging frustration of cheap nasty electronics will backup that it was an expensive lesson learnt.!
Put decent quality electronics with a good motion control card and you'll have hassle free machine that performs with the best of them.!. . . And will do it 24/7 for years.
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
BUILD LOG: a Steel Box Section Build with SBR20 & Ballscrews Plus a few questions
By grain_r in forum DIY Router Build LogsReplies: 130Last Post: 27-01-2023, 06:47 PM -
Belt driven CNC mill - some questions
By Cyclonit in forum Milling Machines, Builds & ConversionsReplies: 1Last Post: 30-04-2014, 12:39 AM -
New CNC mill build
By AVRnj in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 13-04-2013, 12:19 PM -
A few questions before I start my build
By eclassic in forum General DiscussionReplies: 0Last Post: 11-07-2011, 10:54 PM -
NEW MEMBER: Hi from rainy York - build plans/questions
By bikepete in forum New Member IntroductionsReplies: 13Last Post: 11-10-2009, 07:43 AM
Bookmarks