Thread: Fogless Mister Systems
Threaded View
-
25-03-2015 #10
Not really a heat sink, just a packer. underneath is an SSR to control the air valve, the square with a red blob is a 12v lamp-flasher which gives me the pulses, next to it is a 12v reg. (with a couple of ceramic capacitors ) needed because I am supplying 24 volts from my main panel. The AUTO mode is an M7 relay in the panel.
www.wmcpumps.com as on the back of the pump. I chose a 3mm tube but if I replace it will use a 1.5 mill
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Misting Systems - where in the UK?
By Chaz in forum Marketplace DiscussionReplies: 4Last Post: 26-06-2013, 04:38 PM -
CAM systems
By Rob Stewart in forum CAD & CAM SoftwareReplies: 0Last Post: 05-08-2011, 06:24 PM -
Hypertherm Plasma Cutting Systems
By Hypertherm John in forum Milling Machines, Builds & ConversionsReplies: 0Last Post: 04-03-2011, 02:46 PM -
any one know about auto lube systems?
By graffian in forum Milling Machines, Builds & ConversionsReplies: 0Last Post: 02-03-2009, 05:52 AM
Bookmarks