Thread: introduction
-
08-11-2014 #1
Hi every one.
My name is paul,
I am from wolverhampton, in the west midlands.
Just joined the forum a few days & look forward to learning more about CNC's
I am a woodturner by trade, and have my own home workshop.
But i wanted to start decorating my work with intricate inlay,after seeing what can be achieved with an accurate & robust cnc.
I have looked at guitar, and american pool cue designs,which are amazing!
I wanted to ask for advice on getting my own desktop cnc.
Whether there is a cnc out there that i could buy off the peg as it were,or advice on building a dedicated one( with a lot of help).
Have got the room on my bench for a cnc no bigger than 31" x 23"
I also have the computer ready to go, with all the necessary software - v carve pro, mach 3,Artcam,Aspire.
Would want to upgrade later on to a 4TH axis,
The big question is,could it be done with a budget of £1300.00.
There are so many different makes,and models of cnc router to choose from,it is pretty daunting really.
Any help would be very welcome.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Introduction
By JohnHaine in forum New Member IntroductionsReplies: 0Last Post: 25-09-2012, 03:54 PM -
NEW MEMBER: My introduction
By Ashish in forum New Member IntroductionsReplies: 0Last Post: 29-11-2011, 05:57 AM -
NEW MEMBER: Introduction
By mrpeja in forum New Member IntroductionsReplies: 1Last Post: 23-12-2010, 04:59 PM -
NEW MEMBER: introduction
By john696d in forum New Member IntroductionsReplies: 1Last Post: 08-12-2010, 01:38 PM -
NEW MEMBER: Introduction
By madd in forum New Member IntroductionsReplies: 1Last Post: 04-12-2010, 01:31 PM
Bookmarks