. .
  1. #1
    Hi, does anyone have a dimensioned drawing of a suitable holder for the kress spindle. It doesn't have to be to detailed, as I only want to use it to ensure my router design will allow the spindle to go slightly beyond the end of the bed.

  2. #2
    Quote Originally Posted by GTJim View Post
    ensure my router design will allow the spindle to go slightly beyond the end of the bed.

    Will Jim need to know the diameter of the Kress main body so he can workout how far from his Z back plate he needs to offset his 43mm Dia?


  3. #3
    Surely someone must have a 3d cad file of the kress, i need one as well!

    Found one on Google Sketchup but can't export it to a format that will work in my CAD package.

    I hate guessing.....!

  4. #4
    Thanks for the input. I managed to scale a drawing that was posted on the g code section.
    I have been trying to develop my design but I keep thinking that I should start from the tool and work back through the Z axis, and then the X & Y and finally the frame.

  5. #5
    There is not much to one.
    It needs a 43mm hole, some method of clamping, it also need the hole far enough out so the body of the Kress doesn't foul the Z axis and not all Kress's are the same.
    I have a couple of early single speed ones and they are far bulkier than the modern 800 watt ones.

    Where it fastens in relation to the Z axis as regards length sticking out depends on the design of you Z axis or will rely on a sub late or a cranked Kress bracket.

    I can do a drawing and take some pics of the one I have just taken off my router if that will help you but it will have to be later as I'm off out at the moment.

    John S -

  6. #6
    Thanks John that will help.

  7. #7
    Looks like a shiny bog-seat

    Nothing is foolproof......to a sufficiently talented fool!

  8. #8
    Sorry a bit late but here the one I made.

    5" across the bottom as a guide.
    I have taken it off to run the air cooled high speed spindle to do some testing.
    John S -

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. eBay: Kress 1050 FME-1 Spindle
    By viz in forum Items On eBay UK
    Replies: 0
    Last Post: 21-08-2013, 04:04 PM
  2. WANTED: Spindle holder for 1.5kw Chinese spindle.
    By jcb121 in forum Items Wanted
    Replies: 19
    Last Post: 14-10-2011, 02:07 PM
  3. WANTED: Boxford 125TCL Tool holder?
    By Minnican in forum Items Wanted
    Replies: 2
    Last Post: 16-02-2011, 09:22 PM
  4. Secondary Kress spindle mount.. Does it exist?
    By fasteddy in forum Kress Milling Motors
    Replies: 6
    Last Post: 18-08-2010, 05:25 PM
  5. Aluminium Kress Spindle Holder
    By Lee Roberts in forum Metalwork Project Showcase
    Replies: 12
    Last Post: 16-07-2009, 12:00 AM

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts