isel fb1 table about 550 by 550mm new motors new tb6600 drivers new usb breakout

[nobby]

controoller - note I have two of them usb break out boards




ffffff


nema 23 inside motor can/sheild - motor mount - two little screws hold limit switch - hidden in can - no emf

erm connectors are 1/4'' to 1/4''

z axis can has a 56mm x and y could take 76 or 81mm - you don't need to run the cans

the connectors pictured are not connectors, merely 'tidy looking' glands that nip up
7 wire cables 6 core and an earth 1.5mm core numbered 1-6 easy to wire up




has rocker switch but isn't variable speed.

you could have it going in half an hour 'with the lid open on the controller and simply plug in the wires..........................