Hybrid View
-
22-11-2014 #1
Hi michejc,
Thanks for the views and tips I have lots of thinking to do. If I have the workshop built I want it done well so I would spend a reasonable amount and just do it once.
Many thanks
Suesi
-
03-05-2015 #2
Apologies for being late to the party, but if you want some interesting reading on sound reduction, check this link:
http://downloads.bbc.co.uk/rd/pubs/reports/1991-09.pdf
The BBC have put a lot of time into investigating lightweight sound reduction ideas. They're looking at it from the perspective of recording studios rather than workshops but, if you don't mind it getting a bit technical, the PDF linked might give you a better idea of some of the considerations involved.
-
05-05-2015 #3
A while back while i was working in a the depths of an RFA Vessel. We got to thinking about noise reduction or even noise cancelling. We tried a few methods and was semi successfull use a mike and a laptop output the opposite noise. In a small ish place it could work quite well. The computer would in realtime monitor the noise created and output the opposite noise to cancel it out. If i can find the software i used ill post it up.
I know its slightly ott and probably not worth the time, but for al diyers its a great little project.
The principle is that the software generates a inverted sound, essentially cancelling out the sound around you.Last edited by Jester; 05-05-2015 at 06:44 PM.
-
The Following User Says Thank You to Jester For This Useful Post:
-
07-05-2015 #4
Hi Jester,
Many thanks for your msg. I have to say I have not heard of noise cancelation software. I am glad you did not send your msg on April fools day or I may not have given it much thought.
I will have to have a look into how much difference the software can make but it sounds good in theory! I would love to know what software you used and an example of the success you had.
All the best
Suesi
-
07-05-2015 #5
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
THC Setting Issue?
By Davek0974 in forum Plasma Table MachinesReplies: 8Last Post: 17-10-2014, 07:53 AM -
Workshop & Noise Help
By kemo_2002 in forum Workshop & EquipmentReplies: 7Last Post: 12-04-2014, 10:16 PM -
Start of a new built.
By Tanky_Turk in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 06-03-2014, 09:26 PM -
Your views and opinions on the Black Cat CNC Machine 600x900 please
By Rockeyes in forum Milling Machines, Builds & ConversionsReplies: 0Last Post: 31-05-2012, 05:21 PM -
Motor noise
By M250cnc in forum General ElectronicsReplies: 4Last Post: 25-11-2010, 02:06 PM



Reply With Quote

Bookmarks