8x4 router build. Steel base & Aluminium gantry gantry

[D-man]

Yeah was proving difficult to hold one side of the steel up whilst trying to get it level haha

and regarding the board.... shit! this is the one... http://www.edingcnc.com/products.php?productid=55

[JAZZCNC]

and regarding the board.... shit! this is the one... http://www.edingcnc.com/products.php?productid=55

Sorry to shit on your parade but Nah that won't cut the mustard with servo's I'm afraid.
I've got the CNCUSB card which is essentially the same but without Ethernet and the software is shite for me. It's personal thing I'm sure as others like and use it fine but for me we just don't click after using Mach3.!

For steppers the card will work fine and even at a push low count Servo's with electronic gearing but to me one of the points using servo's is increased resolution and accurecy. I also like some overhead so things are not stressed or struggling to keep up when at full chat.! . . Which 125Khz and servos would be most all the time.!