Thread: Accurate Strong Gantry
Threaded View
-
19-12-2014 #16
Extending the gantry uprights down seems good idea -this node should be rethink with the bracing and reinforcement plates in profiles.
My aim is to design parts that can be done by both DIY and machining method.
machine bad is Ok -it has surfaces to be leveled on top -preferably positioned on the same level-that is way stand the gantry leg here at the moment
Y beam is the same -can be done on both way
Z beams will be separated and bolted so it is similar to Y -I do not want to weld a U form and do something with frame -it makes my life hard
rather to make strong flange nodes and the careful assembly and adjustment will give the accuracy (especially the two parallel surfaces)
Nodes will be oriented and fixed with parallel pins.
That is only may plan for now -God knows nothing about it.Last edited by vargai; 19-12-2014 at 09:38 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
By D-man in forum DIY Router Build LogsReplies: 57Last Post: 13-12-2019, 10:43 AM -
BUILD LOG: A sufficiently strong machine
By Jonathan in forum DIY Router Build LogsReplies: 42Last Post: 29-03-2014, 10:40 PM -
Accurate Tape Measure?
By Tenson in forum Tool & Tooling TechnologyReplies: 19Last Post: 26-05-2012, 04:41 PM -
NEW MEMBER: Strong 1212DS - any good?
By MrWiz73 in forum New Member IntroductionsReplies: 0Last Post: 29-03-2011, 11:13 AM -
Bit OT - accurate timing
By m_c in forum General ElectronicsReplies: 3Last Post: 18-05-2009, 01:16 PM
Bookmarks