Quote Originally Posted by silyavski View Post
What i meant was, lets say it in other words- that if you don't have a machine shop at home or access to one, it seems more easy to do it with 2 motors, cause no money will be saved buying all that stuff from internet, postage, custom bores and so, plus later the very careful alignment. It could pay off if 1 servo instead of 2, money wise, but like you say Dean, servo is the good way to go with 2 motors. So at the end is just a personal preference. I simply don't like that long belts. In reality my small machine works in a lot of dust and never had any problem with the belts.
I red about dual drive on other sites and heard of several complaints- homing, running faiulre, etc. I also do not say it is wrong rather say it is an elegant solution but like anything it can get out of order.
If it is happens I can not find on heaven and earth in Hungary expert to repair or without being robbed.
So that is way I get closer to the things from the simple side and it will be a future development.