Beastie

[EddyCurrent]

I was thinking, looking at the initial designs, that it would be a great idea to have all of the sections closed, so that the user could just fill them with dry sand after shipping...

EDIT "And one main idea is also the gantry and sides and base to be epoxy fill ready, sand fill ready." Doh! teach me to look at the pics and not read the text properly before posting... as you were...

Other
Now,here is the deal. the electronics will be below the machine or in the gantry or at both places. And one main idea is also the gantry and sides and base to be epoxy fill ready, sand fill ready. So i will spend a lot of thought here. One thing is clear. The electronics will be inside somehow.

There's a slight contradiction/anomaly, in that the electronics also have to fit inside the gantry or base. That's why I was thinking about a skeleton that itself could be sand/epoxy filled but the spaces in between where the electronics go could be sheeted in.