Need help building a cnc-cutter

[Blackrat]

he means raw carbon .... before its had epoxy applied to it

http://www.cnczone.com/forums/diy-cn...8-cnc-cad.html

for me the hardest part is understanding the post processor for g-code to turn the head to follow the line its cutting

[Boyan Silyavski]

Then you need something similar to drag knife, rotating blade as you say. It must be offset from the shank . Aspire 4 is the answer. It can generate drag knife tool paths .
This is done without motorized knife. its very easy to modify the tool path in any program, once you get the grasp of it.

http://forum.vectric.com/viewtopic.php?f=27&t=19617

By the way i am exactly now developing a drag knife, which is cheaper and i would say better, meaning more functional than the original one. It seems i have to think also of rotary attachment. Just tomorrow would be going to friends house to do some tests. The normal drag knife with utility blade will cut it, though holding down the material will be a problem. But not necessaryly, cause this will be much cheaper than round blades, if managed to achieve. Will report my findings, though glass fiber cloth, i dont have carbon fibre cloth.n

[Blackrat]

why must it be offset from the shank ?

[Boyan Silyavski]

why must it be offset from the shank ?

cause it rotates over the offset point, meanwhile the z is making the corner

[Blackrat]

i understand having it offset from the center point for a drag knife as this acts the same as a castor wheel on a trolley for example

but for a pizza cutter ?

[Boyan Silyavski]

The same, just saves you some cash for motorizing it. I have seen the Donek drag knife with this attachment.

[charlieuk]

you will find it very hard to cut carbon cloth in less it is pre preg, if you are not aware of what pre preg is it cloth that is pre coated with resin on it that you activate by cooking it usualy around 100deg c. Even if you could cut carbon cloth dry it will fall apart as soon as you pick it up or try do anything to it. You can use a method were you use a spray adhesive to stick the carbon to wax paper which you then wet it out on but you will still get distortion and loose any sort of accuracy. Pre preg is nice stuff to work with but it must be stored in a freezer and must be cooked to cure it and it is also expensive.

[Gotty101]

Artic Monkey, im guessing you have already worked with carbon or even glass cloth. As charlieuk said, i think you will have to come up with a plan to cut it if its not prepreg. I use it in another hobby i do and i use the wax paper trick but the final item is trimmed to size anyway.

I Wonder if a rolling cutter or a laser would be better. In any case with out prepreg or a backing the edges will fray like mad depending on the weave.

Trev