Quote Originally Posted by Ross77 View Post
I think it was left hand to resist loosening during rotation, you should be able to chase the direction of the thread that is visible.

Mines a mix of atlas and halifax. Robbed all the best bits to make one lathe, most bits are interchangeable, except the spindle shafts.

If you get an atlas shaft then you will need the complete set up, pullies,bearings and oil seals as well. If you can stay awake have a look at my atlas 10 repair thread, page 4 for the spindles.

Pm me, might have a few bits you need.
Will do I will get some of the broken parts together and pm link to photo.