Use of epoxy for levelling

[JAZZCNC]

Thats all folks. Do it properly and you will have 0.01 precision. Though of course people could lie to themselves and believe they have done it ok.

Sorry Boyan but who's lieing to them self's if they believe they can measure to 0.01mm accurecy over 3000mm length.!!! . . . . . Yes Epoxy method works OK and easy when done correctly but anyone is fooling them selfs if they think there going to get accurecy down to the Hundreth's MM's over such length and width.!!

Thou as they say in Yorkshire " Proof is in eating the pudding" so when your machine is finished let us know if your machine can surface two faces parallel to each other across it's full length & Width then surfaces hold ONE hundreth millimeter parallelism over the whole length.? . . . Then I'll be impressed and Don my Flat Cap to epoxy and You Sir.!