Ar last!!! Started my Gantry 3-Axis CNC Build

**JAZZCNC** · 11-02-2018

Originally Posted by MikeyC38

The proud builder with his machine....

Well done that man.! . .

**MikeyC38** · 11-02-2018

Cheers Jazz - and again if it was'nt for your good advice and willing help I would'nt have got it working as well as it does!

**routercnc** · 12-02-2018

Well done Mikey looks great !

**Clive S** · 12-02-2018

Plus one

It's always nice to see another build come to completion

**MikeyC38** · 12-02-2018

Thanks Guys for your kind remarks. Still struggling to get the NPN proximity switches working in my setup. I will do a wiring diagram and try again to get some help!

**Clive S** · 12-02-2018

Originally Posted by MikeyC38

Thanks Guys for your kind remarks. Still struggling to get the NPN proximity switches working in my setup. I will do a wiring diagram and try again to get some help!

Yes stick a diagram as how you have it wired including what voltage you are using etc.

**wallyblackburn** · 12-02-2018

Originally Posted by MikeyC38

Thanks Guys for your kind remarks. Still struggling to get the NPN proximity switches working in my setup. I will do a wiring diagram and try again to get some help!