Threaded View
-
11-12-2014 #1
The day has come and I have finally started my 3-axis Gantry router build. I've been lurking on the forum for too long now and its time to do this. Firstly thanks to all the forum members who have contributed to the design - Jazz, John & HiltonSteve who inspired me with his build all those years ago. Attached are some 3d renderings and pics of stuff. Currently doing lots of drilling holes and counterboring in ali strip and plate for the bolts etc.
Basic machine specs are:
3-axis 1100 x 700 x 300 ballscrews.
SBR20 on X SBR16 on Y & 7
Frame from 80x40mm heavy and intermediate extrusions (2.8 and 4kg/m)
Plate - Gantry sides 20mm cast plate 5083
Z axis - Tooling plate cast 5083
Frame Ends 15mm plate 6060
3.1Nm Steppers CNC Kit 1 from Zapp
Photos taken in a unit my neighbour has - did'nt trust the runout on my pillar drill with M8 clearance drill.
Watch this space for more pics as build progresses
Mike
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
By D-man in forum DIY Router Build LogsReplies: 57Last Post: 13-12-2019, 10:43 AM -
Setup for squaring twin X-axis gantry
By routercnc in forum Gantry/Router Machines & BuildingReplies: 20Last Post: 26-03-2014, 11:13 PM -
BUILD LOG: New build - fixed gantry mill using extruded profile
By toolchimp in forum DIY Router Build LogsReplies: 3Last Post: 09-11-2012, 04:10 PM -
NEW MEMBER: New Member build finally started in Oxfordshire
By pjchick in forum New Member IntroductionsReplies: 1Last Post: 26-11-2010, 04:02 PM -
BUILD LOG: Flying Gantry Build Diary
By geoff.sim in forum DIY Router Build LogsReplies: 8Last Post: 29-05-2008, 02:53 AM
Bookmarks