Quote Originally Posted by routercnc View Post
My wife was watching the Royal wedding recently and there was a comparison made to the dress worn on the previous Royal wedding. She said the other dress was much better and asked my opinion. ‘They are all great- just variations on a theme’. Apparently this was not the right answer.


2) Yes, send stop signal to the VFD. My understanding is that the spindle will spool down and the back EMF could damage it if power is removed. You can use a delay timer if you really want to cut power after a second or two. But for home DIY machines this is not commonly done.
I agree with you on item 1 - That's why I have never bought clothes for my wife - I give her the money to make her own choice because whatever I chose it would still be wrong!

Regarding item 2 I have'nt got any ideas at the moment how to do this so will look through the forum for some ideas. My initial thoughts was to do something through the 0-10v input but as my VFD is using Modbus then this might not work..