Ar last!!! Started my Gantry 3-Axis CNC Build

**njhussey** · 31-12-2016

Originally Posted by MikeyC38

Thanks Neil. Ideally I would like to get the proximity homing switches working

so that I can get tool changes consistent and touch plates. These items improve productivity.

Cheers - Mike

That's the best thing I've done on my machine, makes life so much easier and jobs quicker! What BOB/controller you using?

Sent from my HUAWEI VNS-L31 using Tapatalk

**MikeyC38** · 31-12-2016

Originally Posted by njhussey

That's the best thing I've done on my machine, makes life so much easier and jobs quicker! What BOB/controller you using?

Sent from my HUAWEI VNS-L31 using Tapatalk

I am using the Zapp BoB ZP5A-INT and the NPN proximity switches as suggested by Jazz some time ago. I posted this a couple of months ago, but could'nt get it working. I have a separate 24v PS for the relay safety system which I also wanted to use to power the prox switches. But if you or Jazz can give me some inspired thoughts I would be grateful

Regards
Mike