Simple Machine (help and advice needed)

[EddyCurrent]

Hi
When you talk about the gantry rails are they the rails on the x axis,

Well I assumed mekanik was talking about the Y rails, those actually on the top and bottom of the gantry cross beams.
Are you putting the Y ball screw between the two cross beams ? if you are it's been suggested to add a plate to the front to keep crap away from the screw. This means putting a slot in the plate to allow the bracket where the ball nut attaches to the Z axis to move across. like here; http://www.mycncuk.com/threads/6418-...8048#post48048
It also adds strength to the two cross beams.