Quote Originally Posted by GoBo View Post
Im still in the process of haveing to google everything people mention at the moment. I amm assuming that these drivers are the main control for the motors, which recieve instruction from the PC/Software.
Matt(kingcreaky) was meaning to stay away from these.!!

Honestly best advise is do or buy nothing yet untill you have properly researched what your doing and working with. Jumping in feet first is 100% guaranteed to waste your money and time.
Then hopefully after doing this you'll realise that MDF/draw slide approach isn't worth the time or money and go straight with doing it correctly first time. This doesn't mean throwing loads of cash at it either, it can still be done relatively cheaply with careful buying and patience along with a little help guidance from others.

MDF/Draw slides path is time & money wasted on what could be good cheap machine that will return any investment if no longer required which isn't the case other way around.!! . . .It's scrap bin fodder.!