Altivar inverter - setting maximum speed

[EddyCurrent]

John,
If you're asking about that it makes me wonder if you have the motor parameters set up correctly.
Referring to this manual; http://www2.schneider-electric.com/r...g%20manual.pdf
It's always a good idea to start off with factory default settings, page 55
Then set up the motor parameters, Page 59 (ItH) and Page 62
As Jazz says the max. freq. parameter is on page 63

Also, Is the connected motor designed to run at that frequency / speed ? you don't want it flying apart or the bearings siezing.