Hi,
Can anyone out there give any advice on upgrading a Denford Starmill.
It used to run fine on a BBC but has stopped talking to the computor.
I want to run off a Laptop. The input sockets that exist are 7 pin din Rs232 and a 15 pin 2 row D (DA-15) that is marked up "AuX input"
I was hoping not to have to change motors or boards at this stage as I have just done my Emco 5Cnc (Welturn) but will if that is only option.
Any advice on this and related stuff most appreciated. Phil Gravett (PhilCraft)