Hybrid View
-
18-12-2014 #1
Hi all, I hope this is in the right area. I need to picture below converting to DXF / Gcode. I'm a little lost ! Are there any kind chaps out there willing to do this for me for me please.
I would be grateful if someone could help, thank you.
Thank you very much
Carl
Last edited by Gasgasbones; 18-12-2014 at 04:38 PM.
-
18-12-2014 #2
Download Draftsight, it's free (plenty of other free drawing programs out there) insert the image as a reference image and draw over it on a different layer. Scale it to the correct dimensions and it's a dxf...
-
18-12-2014 #3
Thanks Neil, which DFX should I save it to, there seems to be a load of options !
-
18-12-2014 #4
I save them as 2013, only really matters if you're sending to someone else who can't open 2013 files...
-
18-12-2014 #5
Carl, try this, used Inkscape to vectorize it then CamBam to clean up a few bits.
Last edited by EddyCurrent; 18-12-2014 at 06:00 PM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
18-12-2014 #6
-
18-12-2014 #7
Spot on, no problem, here's the links
https://www.inkscape.org/en/
http://www.cambam.info/screenshots/Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
Help required with desktop cnc build - cutting out the required plates
By alanb in forum OpenBuilds OX CNC MachineReplies: 0Last Post: 08-07-2014, 03:11 PM -
NEW MEMBER: Jig angle head expert look at my PICTURE please!
By hoezap in forum New Member IntroductionsReplies: 6Last Post: 25-07-2012, 05:09 AM -
mods picture and site logo
By motoxy in forum General DiscussionReplies: 3Last Post: 26-04-2012, 01:09 PM -
Microcarve picture carving software
By cnctoybox in forum CAD & CAM SoftwareReplies: 0Last Post: 26-03-2012, 07:00 PM -
Tapping Gcode
By Kai in forum General DiscussionReplies: 10Last Post: 14-12-2010, 07:07 PM
Bookmarks