Hybrid View
-
18-12-2014 #1
Spot on, no problem, here's the links
https://www.inkscape.org/en/
http://www.cambam.info/screenshots/Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
18-12-2014 #2
Cheers.
First attempt. I will need to fiddle about with some settings and get a smaller engraving cutter as its cutting into some other lines, That's not a problem though.
Cheers Again
carl
-
18-12-2014 #3
Maybe use a V cutter and don't cut so deep
Last edited by EddyCurrent; 18-12-2014 at 10:53 PM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
19-12-2014 #4
-
19-12-2014 #5
I like these ones because they work from small to large and have almost zero point width;
There's a 60deg and 90deg.
http://www.wealdentool.com/acatalog/V_Grooving_44.html
Edit: Sorry I just realised I use these for wood and you are cutting metal, don't know if they are for metal.
Also try these;
www.cutweltools.co.uk
http://www.advancedcarbidetooling.co.uk
http://www.titman.co.uk/
http://www.cutter-shop.com
http://www.completecnc.co.uk
http://www.suregrave.com/cutters_tc.html
http://www.tooltec.co.uk
www.routercutter.co.uk
http://www.routertooling.co.uk
http://www.gravograph.co.uk
http://www.arceurotrade.co.uk/catalo...raving-cutters
http://www.shop-apt.co.uk
http://www.cncroutershop.com/uk/Last edited by EddyCurrent; 19-12-2014 at 05:29 PM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
19-12-2014 #6
-
19-12-2014 #7
If when in CAD you select the top 5 characters by left clicking just to the bottom right of the 5 characters and then stretch the selection rectangle round all 5 characters you can then select the move command and if you have F8 pressed (ortho mode) you can then move them (pick any point as the reference point) up at 90° to the C.....
-
19-12-2014 #8
-
19-12-2014 #9
Here's 3 files with different distances as indicated in the file name.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
19-12-2014 #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help required with desktop cnc build - cutting out the required plates
By alanb in forum OpenBuilds OX CNC MachineReplies: 0Last Post: 08-07-2014, 03:11 PM -
NEW MEMBER: Jig angle head expert look at my PICTURE please!
By hoezap in forum New Member IntroductionsReplies: 6Last Post: 25-07-2012, 05:09 AM -
mods picture and site logo
By motoxy in forum General DiscussionReplies: 3Last Post: 26-04-2012, 01:09 PM -
Microcarve picture carving software
By cnctoybox in forum CAD & CAM SoftwareReplies: 0Last Post: 26-03-2012, 07:00 PM -
Tapping Gcode
By Kai in forum General DiscussionReplies: 10Last Post: 14-12-2010, 07:07 PM
Bookmarks