Gav's Caravan Project.

[mike os]

that floor looks awesome...cant wait to get my own toy to play with...

[Swarfing]

What was the actual wood you used? don't see it on the blog

[magicniner]

I thought it said veneered MDF was chosed over veneered ply for it's clean cutting at the corners?

[gavztheouch]

I think he used 6mm oak veneered mdf, he also said if he could do it again he would try and find a veneer with a thicker oak section so he could sand the whole thing down afterwards. You can see some of the lizards do not sit flush which is a shame cause the veneer is so thin he cannot level it off with floor sander.

[Swarfing]

Yes i read it again...doh! I did something similar for a friend with a Moroccan pattern and used pallet wood for the job. I used tea to add tanning and then stained it with wire wool steeped in white vinegar.

[gavztheouch]

Some before/(during the removal of the 3rd bedroom) pics.

[EddyCurrent]

Looking at the deconstruction method used, I would say you had a 'stress relief' session